Brisbane Thatch & Decks
"Bali Huts"

Oval African Cape Reed Thatch Gazebo Structures

With the Oval African cape reed Gazebo's Brisbane Thatch and Decks needs the following information:

1) Measure the distance as shown on the diagram above: Z and Y. This would be the distance from the outer steel ring, normally a steel flat bar. ( Don't measure the outer red Line - - - - - -  The red line represents the outer edge or overhang of the cape reed thatch tiles  ). Z could be measured at he bottom of the frame.

2) Just the number of 8mm Round bars or steel rings.

( Don't count the ridge as a ring, although it have two parallel 8mm round bar's either above or on the sides of the flat bar and

 Don't count the first ring which would be the steel flat bar ! Just  the 8mm round rings going up. )

For example: In the diagram above ( Oval African Gazebo Dimensions ) 

(1) Length would be X mm and diameter would be Y mm.

2) The number of rings would be 3 ea.

​

3) Please send a few photos from outside close and far, plus inside as well.

​

Thank you so much.

With this information we can calculate very accurately the amount of African Cape Reed Thatch Tiles you are going to need to Re-Thatch your African Cape Reed Gazebo.